Work Ready Service Truck

CHASSIS

2002 Ford model F-650 "Regular Cab" equipped with:
  • 26,000 lbs. Gross Vehicle Weight Rating (8,500 lb./FRT & 17,500 lb./rear)
  • Caterpillar model 3126B electronic engine (210 HP)
  • Spicer model ES066-7B 7 speed manual transmission
  • Cab Color = OXFORD WHITE (YZ)
  • Medium Flint / Knit Vinyl Trim Interior
  • Vertical cab mounted exhaust
  • Air Brake Package w/ air dryer - ABS
  • Dual 50 gallon fuel tanks
  • Goodyear 10R 22.5F (G124) Tires
  • Stainless steel West Coast mirrors
  • Handling Package (#55A)
  • Cruise control
  • Air Conditioning
  • Mid-Back driver's seat
  • 2-man, fold-down passenger bench seat
  • Tilt Steering Column
  • Electronic AM/FM Stereo
  • Front tow hooks
  • Chromed front grill
  • Synthetic lube transmission
  • Synthetic lube rear axle
  • Wheel seals Synthetic oil - front
  • Engine block heater
  • Plus additional standard Ford features

CRANE SERVICE BODY
Auto Crane model 50k-133 equipped with:
  • 133" long x 94" wide
  • 48" tall x 22" deep compartments
  • 60" tall x 22" deep front vertical compartment - Curb Side
  • 60" tall x 22" deep front vertical compartment - Street Side
  • 50" wide center cargo area
  • Unobstructed 50,000 ft. lb. Crane reinforcement
  • Standard shelving package
  • Oxygen/Acetylene storage in front vertical compartment - curb side
  • Six (6) recessed floor tie downs in cargo area
  • Electronic back-up alarm
  • Aluminum treadbright tailgate cap
  • Aluminum treadbright rock guards on front of body - full height
  • All necessary FMVSS 108 required lights
  • Six (6) recessed LED stop, tail, & turn lights (2 in rear body panels / 4 in rear bumper)
  • Rear mud flaps
  • 24" galvanized workbench bumper with vise plate, storage area, and hinged doors (includes rear cable step w/ chrome grab handle)
  • Full hydraulic power in/out, power up/down outrigger assembly
  • Entire body painted inside & out with Sherwin Williams Genesis (Acrylic Urethane)
  • Plus additional standard features

HYDRAULIC CRANE
Auto Crane model 8406H "New Product":
  • 50,000 ft. lb. Rating with the following capacities:
    • 8,400 lbs. @ 6 ft.
    • 5,000 lbs. @ 10 ft.
    • 3,333 lbs. @ 15 ft.
    • 2,500 lbs. @ 20 ft.
  • 12 ft. to 20 ft. hydraulic powered boom extension - No manual extensions
  • Planetary geared hydraulic winch with 60 ft./minute line speed (single)
  • 95 ft. of 3/8" aircraft quality cable
  • "SMART CRANE" Diagnostics System
  • Two-Speed rotation control (Automatically doubles rotation speed while crane is unloaded)
  • FM Radio Remote Control (Cordless) Pendant w/:
    • Crane controls
    • OPTI-METER proportional crane control
    • Engine start/stop
    • Engine throttle control
  • Crane painted Auto Crane white
  • Crane boom support
  • Spring build-up of chassis leaf springs on crane side
  • Plus additional standard features

HYDRAULIC AIR SYSTEM
Auto Crane model AC30A compressor package including:
  • Hydraulic driven reciprocating/piston style air compressor providing 30.0 ACFM @ 100 PSI with maximum working pressure to 150 PSI
  • 36-1/2 gallon air receiver tank mounted underbed @ rear with H20 drain valve
  • 3/4" air filter-lubricator-regulator on main service line from air receiver to hose reel
  • Spring rewind air hose reel with 50 ft. of 1/2" I.D. air hose, 4-way roller, and ball stop
  • Plus additional standard features

HYDRAULIC SYSTEM
  • Air shifted Power Take Off
  • Direct Mount Tandem Hydraulic Pump providing simultaneous operation of crane & compressor
  • Bulkhead mounted hydraulic oil reservoir assembly
  • All necessary connecting hydraulic hoses, oil, & fittings
  • Programmed electronic engine throttle control on Caterpillar model 3126 engine
For more information, contact Sales at Ace Truck Body.